40W Kangertech KBox 18650 VW MOD

Kangertech Box Mod has finally arrived.  There first removable battery box type mod.

There are seven wattage output settings – 8, 13, 20, 25, 30, 35 and 40 watts – the user can select with the touch of a button. The output increase/decrease is indicated by an LED light.

The KBOX has an aluminum chassis so you get a heavy-duty vaping device that is lightweight which just sits in the hand comfortably. This box mod works with any 18650 IMR type battery but KangerTech recommends cells that operate at 20A or more to achieve best results. The KBOX has all the safety features you would expect from Kanger including short circuit, over-current, and reverse battery protection. Power output will be cut off automatically if you press the firing button for more than 10 seconds to prevent damage to your atomizer.

A set of bright LED lights indicates remaining battery power. The KBOX also has a heat dissipation hole and interchangeable battery socket. With a 510 connection, this box mod from Kanger can work with most atomizers available on the market.

The KangerTech KBOX is designed for vapers who are new to mods. Any beginner can enjoy all the advantages of a variable wattage box mod and you do not have to use subohms (but can down to 0.4 if you likem, just make sure your 18650 battery (not included) can handle it

Features:

Replaceable 18650 battery (the battery is not included and must be purchase seperately)

Battery level indicator

7 wattage settings (8W, 13W, 20W, 25W, 30W, 35W and 40W)

Fires sub-ohm atomizers as low as 0.4 ohm

Lightweight and durable

510 connection

Safety:

Short circuit protection (in case the connector output or coil has a short, the power indicator light will flash 3 times and disable any output)

Low resistance protection (for coils with less than 0.4 ohm, it will disable output with power indicator light flash 3 times)

10-second cutoff (if the power button is held longer than 10 seconds, power indicator light will flash 3 times and output will be disabled automatically)

Overcurrent protection

Reverse battery protection

How To Use Your KangerTech KBOX Mod

To turn the battery on/off, press the power button 5 times within 3 seconds.

To change the current output wattage, keep pressing the wattage switch button until you reach the desired wattage. After the wattage setting passes the 40W mark, it will reset back to 8W.

The battery level indicator will flash 15 times when the cell needs recharging.

Note: Battery is not included in this kit. The user must purchase an 18650 battery, we recommend ONLY using “IMR” batteries in this mod.  Kanger notes using batteries with a continuous discharge rate of 20 Amps or higher.

Warning:

Do not charge the unit outdoors.

Keep the KBOX and battery away from water.

Do not use the KBOX for any other purpose than vaping.

Choose suitable wattage settings to prevent any damage to the coils.

Keep away from children and pets.

Do not try to disassemble the KBOX.

Do not use the KBox in extreme temperatures.

Specifications:

Requires a seperate Battery: 18650 (discharge >20A)

Wattage output: 8-40W

Height: 89mm

Length: 40mm

Width: min 20mm, max 25mm

Package Contents:
1 x KangerTech KBOX mod (battery not included)

Manufacturer Warnings:

Do not charge the unit outdoors.

Keep the KBOX and battery away from water.

Do not use the KBOX for any other purpose than vaping.

Choose suitable wattage settings to prevent any damage to the coils.

Keep away from children and pets.

Do not try to disassemble the KBOX.

Do not use the KBox in extreme temperatures.

 

40W Kangertech KBox 18650 VW MOD